- Setandar Kecepatan IEEE 802.11 a/b/g/n berdasar jarak: klik link Berisikan artikel mengenai standar kecepatan IEEE 802.11 wlan dengan jarak tertentu, misal 5mt berapa kecepatanya, 10m berapa kecepatanya. satuan yang digunakan dalam satuan feet. Range dalam feet.
- Real speed IEEE 802.11 a/b/g/n berdasar percobaan :klik link Berapa sebenarnya teransfer rate nyata atau real dari standar IEEE 802.11 berdasarkan percobaan yang dilakukan dan literatur yang ada.
- Standar Kecepatan IEEE 802.11 a/b/g/n sumber website resmi, sebagai berikut :
Referensi : http://www.ni.com/white-paper/7131/en
- 802.11a: The signal is transmitted at 5 Ghz and can move up to 54 megabits of data per second. It uses Orthogonal Frequency-Division Multiplexing (OFDM), which is an efficient coding technique that splits the radio signal into several sub signals before they reach a receiver. This greatly reduced interference between signals.
- 802.11 b: This is the slowest and least expensive existing standard. Initially, 802.11b was the most popular standard because of its cost, but as faster standards get less expensive, 802.11b is losing popularity. This standard transmits in the 2.4 Ghz frequency bandwidth. It can transmit up to 11 megabits of data per second and it uses Complimentary Code Keying (CCK). 802.11b is based on Complementary Code Keying (CCK).
- 802.11g: 802.11g transmits at 2.4 Ghz like 802.11b but at faster rates. It can transmit upto 54 Mbits per second. Similar to 802.11a, 802.11g transmit faster because it uses OFDM instead of CCK.
- 802.11n: This is the most recent standard and is becoming commercially available. This standard significantly improves speed and range. For instance, although 802.11g theoretically transmits 54 Mbits of data per second, it only achieves real-world speeds of about 24 Mbits per second because of network congestion. 802.11n, however, can transmit as high as 140 Mbits per second.
Sumber 2:
Referensi
Lain: http://compnetworking.about.com/
- · 802.11
In 1997, the Institute of Electrical and
Electronics Engineers (IEEE) created the first WLAN standard. They called it 802.11
after the name of the group formed to oversee its development. Unfortunately,
802.11 only supported a maximum network bandwidth of 2 Mbps - too slow
for most applications. For this reason, ordinary 802.11 wireless products are
no longer manufactured.
- · 802.11a
802.11a supports bandwidth up to 54 Mbps
and signals in a regulated frequency spectrum around 5 GHz. This higher
frequency compared to 802.11b shortens the range of 802.11a networks. The
higher frequency also means 802.11a signals have more difficulty penetrating
walls and other obstructions.
- · 802.11b
IEEE expanded on the original 802.11
standard in July 1999, creating the 802.11b specification. 802.11b
supports bandwidth up to 11 Mbps, comparable to traditional Ethernet.
- · 802.11g
In 2002 and 2003, WLAN products
supporting a newer standard called 802.11g emerged on the market.
802.11g attempts to combine the best of both 802.11a and 802.11b. 802.11g
supports bandwidth up to 54 Mbps, and it uses the 2.4 Ghz frequency for
greater range. 802.11g is backwards compatible with 802.11b, meaning that
802.11g access points will work with 802.11b wireless network adapters and vice
versa.
- · 802.11n
The newest IEEE standard in the Wi-Fi
category is 802.11n. It was designed to improve on 802.11g in the amount
of bandwidth supported by utilizing multiple wireless signals and antennas
(called MIMO technology) instead of one.
When this standard is finalized, 802.11n
connections should support data rates of over 100 Mbps. 802.11n also
offers somewhat better range over earlier Wi-Fi standards due to its increased
signal intensity. 802.11n equipment will be backward compatible with 802.11g
gear.